2 Wire Alarm Panels

LS400 Two-Wire Alarm Panel

LY52-005-38

The LS400 2 wire alarm panel is a 4 zone security panel that works exclusively with 2 core cable and operates with bespoke 2 wire accessories. It is easy to install, programme, and operate and should be considered in conjunction with the 2 wire PIR’s, 2 wire magnetic contacts, 2 wire dialler and 2 wire external bellbox.

This panel and associated accessories are perfect for the DIY market requiring no special tools or training.

LS400 Alarm Control Panel Specifications
4 programmable zones
Arming/Disarming
Through on board keypad
Programmable Timers
Full guard entry/exit delay: 15, 30 or 45 seconds
Part guard exit delay: 15, 30 or 45 seconds
Siren duration: 1, 3 or 10 minutes
Walk Test
Visual on all zones
Programmable Functions
Full guard & part guard
4 programmable zones
Timed entry/exit, walk through, instant, chime
Codes: 1 user, 1 silent (duress) if dialler fitted
Power Supply Adaptor
Primary mains adaptor voltage rating 230Vac, 50Hz, 10Watt
Secondary 15Vac, 900mA
Battery back up 8 X 1.5V, size AA alkaline batteries
Environmental Specification
Operating Temperature -0ºC - + 40ºC
Storage temperature -20ºC - + 60ºC
Maximum humidity 95% non-condensing
Physical Specification
Dimensions 185mm X 160 mm X 50mm
European Standards
Conforms to European law (EU) Low Voltage Directives LVD 73/23/EEC (amended 93/68/EEC) and Electro-magnetic Compatibility (EMC) 89/336/EEC (Amended by 92/31/EEC and 93/68EEC) RoHS
Features

An easy to install, simple to operate four zone system with new two wire technology. All system components are connected to the control unit using two core non-polarity wires.

Simple operation, convenient push button Home and Out arming. Home and Out modes are pre-programmed for user convenience. When system switched Off, door chime function is available.

All sensors, sounders are 24hr line protected and fully supervised. Any attempt to interfere with the system, such as cutting the wires or opening any of the PIR detector, will trigger the alarm and be identified by flashing LED’s and zone indicator.

Tamper attacks to any zone sensor will trigger the alarm and be identified by flashing LED’s and zone indicator, but the rest of the system is protected.

Expandable system, two PIR’s can be fitted to one PIR zone, therefore the system can be expanded to have 4 PIR’s plus many contacts. Also there is the option of adding a telephone dialler with easy wiring connections.